HVAC, Plumbing & Electrical in Seattle, WA: Ballard to West Seattle

What HVAC, Plumbing & Electrical Services Does Resicon Offer in Seattle, WA?

Seattle homeowners hire Resicon to keep heat pumps, furnaces, water heaters, pipes, and panels working, with one Washington-licensed team behind all of it. The company dates to 2009 and has been a dedicated HVAC company since 2013. Reach us at 253-242-5306 or through request service online, and a technician will take it from there.

Seattle’s housing runs from century-old homes on Capitol Hill to newer builds in Ballard and homes across West Seattle. Equipment, ductwork, and wiring differ from block to block, so our technicians study the system in front of them first and walk you through the options before any work starts.

WA Licensed & Bonded (RESICL874OF) | WA Electrical Contractor (RESICL919N7) | Mitsubishi Diamond Elite Contractor | 4.9★ from 400+ Google Reviews

Heat Pump Installation, Repair & Maintenance

Heat pumps are the work Seattle customers write to us about most. Resicon installs heat pumps for whole-house comfort, diagnoses units that ice up, stop heating, or never start, and services them every year so small problems stay small. As a Mitsubishi Diamond Elite Contractor, we can recommend ducted or ductless equipment and explain what each will do for your home.

Reviewers in Ballard, Green Lake, and the Rainier Valley describe the same pattern: a technician who explains the work, the same person returning each year, and a system that keeps running. One customer in the 98107 area noted that Jason knew her system because he was part of the crew that installed it.

Furnace & Heating Repair, Installation & Replacement

A heating system that short-cycles, blows cool air, or will not start needs a cause, not a guess. Resicon inspects the thermostat, controls, ignition, blower, and venting before it quotes a repair, and explains when furnace installation is the better call.

If your Seattle home has an older furnace, a failing thermostat, or heat that never evens out from room to room, we can repair what is worth repairing and size a replacement to the home’s load rather than the old unit’s nameplate.

Zone Control System Repair & Maintenance

Rooms that run hot or cold while the thermostat reads fine often trace back to the zoning. Resicon services and repairs zone control systems, including dampers, control boards, and thermostats, and installs new zoning where a layout calls for it.

Larger Seattle homes with several floors or additions are where zoning earns its keep. We check how the zones are wired and balanced so each space gets the air it was meant to.

Air Conditioning Repair, Installation & Replacement

Warm air from the vents, a coil that ices over, or an inspection before the first hot week: Resicon handles air conditioning repair, installation, and replacement for Seattle homes. We test refrigerant, airflow, and controls so you know what is wrong before approving a fix.

If your Seattle house was not built with cooling in mind, a heat pump or a ductless head can cool without ripping into walls, and we will show you how each compares.

Ductless Mini-Split Installation & Repair

Where there are no ducts, a mini-split still delivers heating and cooling. As an NW Ductless Master Installer, Resicon designs, installs, and services ductless systems for attic rooms, basements, additions, and houses that never had ductwork.

Seattle customers often pair a ductless system with a single hard-to-heat room. We can size one head or a multi-zone setup, then confirm the electrical capacity before installation day.

HVAC Maintenance & Inspection

A yearly maintenance visit covers heating and cooling inspections, filters and airflow, electrical and safety checks, and a close look for early wear. Our technicians point out what they find in plain language and flag anything worth watching.

Many Seattle homeowners book their checkup in early fall, ahead of the first cold snap, and again in spring. Heat pump owners get the most from that rhythm because the equipment works in both seasons.

Water Heater Repair, Installation & Replacement

If the shower runs cold, the tank is leaking, or the unit rumbles, Resicon diagnoses the problem and tells you whether to repair or replace. We install water heaters of every type, including tankless units and heat pump water heaters.

Heat pump water heaters need both a plumber and an electrician. Because our crews include both, the dedicated circuit and the plumbing connections get handled on the same job.

Plumbing Repair, Leak Detection & Maintenance

Dripping fixtures, running toilets, weak pressure, and stains on a ceiling all point to a cause someone needs to find. Our plumbing team repairs fixtures and pipes, and our leak detection service locates hidden water before it does more damage.

Routine plumbing checks catch worn supply lines, failing shutoffs, and slow leaks while they are still cheap to fix. Customers who join our maintenance program also get priority scheduling.

Drain Cleaning & Sewer Services

For slow drains and recurring clogs, Resicon offers drain cleaning with hydro jetting for stubborn buildup and camera inspections that show what is happening inside the pipe. If a line has failed, we repair it or handle full sewer line replacement.

In Seattle, if you own the home, you own the side sewer all the way out to the public main, so a backup in your line is usually yours to solve. A sewer camera inspection before you buy an older house shows its condition, and we explain what the footage means.

Pipe Replacement & Repiping

Old galvanized or tired supply lines show up as low pressure, brown water, or leaks that keep moving. [Company-name] replaces them with copper or PEX through repiping, working one area at a time or across the whole house.

Before recommending anything, we confirm what material you have and how it is holding up. In some Seattle homes a targeted repair is enough, and we will say so.

Electrical Repair, Wiring & Panel Services

When wiring is the problem, our electricians diagnose it and fix it: electrical faults, panel upgrades, new lighting, EV chargers, and the dedicated lines heat pumps and heat pump water heaters need. The findings come first, and any proposed fix follows.

Adding a heat pump to an older Seattle home often means checking the panel first. We measure available capacity so the upgrade fits the equipment you are installing.

Whole-House Humidifier, Dehumidifier & Air Quality

Condensation on windows, a musty smell, or a dry winter indoors usually means humidity is out of balance. We install and repair whole-house humidifiers and dehumidifiers that tie into your HVAC system, and our indoor air quality work includes ventilation and whole-home air purification.

Building Performance Institute Building Analyst and air-sealing certifications, earned through utility weatherization programs, mean our technicians consider air, moisture, and equipment together.

Commercial HVAC Services

Seattle offices, shops, and light commercial buildings can count on Resicon for commercial heating and cooling: rooftop unit repair, heating repair, replacements, installs, and scheduled maintenance, each explained plainly.

We have also done public-sector work in the city. In 2018, Resicon installed Sanden heat pump water heaters and ductless heat pumps in 24 low-income Seattle apartments through the City of Seattle Office of Housing’s HomeWise Weatherization Program.

Why Seattle Homeowners Choose Resicon

The Inc. 5000 has named Resicon three times, in 2019, 2020, and 2024, and co-owner Vielka Ansari was recognized on Inc.’s 2024 Female Founders 250 list. The company began in 2013, when Ansari and Craig Christensen, who had met at a construction company, borrowed against a small business loan to start it. Today more than 40 employees staff eight daily crews. Seattle reviews name technicians such as Ian, Jason, and John and praise thorough explanations, quick responses, and tidy work.

Seattle, WA HVAC, Plumbing & Electrical Questions, Answered

Who installs Mitsubishi heat pumps in Seattle?

Resicon is a Mitsubishi Diamond Elite Contractor and installs ducted and ductless Mitsubishi systems. A visit covers your home’s heating load, ductwork or room layout, and electrical capacity, and the proposal explains what the equipment will do for your house.

My Seattle heat pump stopped heating or is icing over. What should I check?

Confirm the thermostat is in heat mode and the filter is clean, then look at the outdoor unit. Some frost during defrost is normal, but heavy ice or no heat means it needs service. Tell us what you saw and heard when you call, and a technician can diagnose it and outline the repair.

Why are some rooms in my Seattle house too hot or too cold?

Uneven rooms can come from airflow problems, duct leaks, a mis-set thermostat, or a zone control system that needs repair. We check each, including damper operation and control boards if your home is zoned, and explain what will even things out.

Should I repair or replace my furnace or heat pump in Seattle?

Compare the equipment’s age, its repair history, and the repair quote against a new system’s reliability and running cost. A newer unit with one failed part usually deserves a repair. Frequent calls on aging equipment point toward replacement. We price both so the choice is yours.

Do you repair whole-house humidifiers and dehumidifiers in Seattle?

Yes. Whole-house humidifiers and dehumidifiers that run off your HVAC system are repaired and installed by our team. A technician checks the unit, the water supply or drain, and the humidity reading you are trying to fix.

Who is responsible for a clogged sewer line at my Seattle home?

If you own the home, you own the side sewer from the house to the public sewer main, which is the city’s responsibility from there. A camera inspection shows where the problem sits, and we can clear, repair, or replace the line.

Can I cool my Seattle home without adding ducts?

Yes. A ductless mini-split or a ducted heat pump can cool the house, and ductless heads work in homes with no ductwork. We lay out the equipment, and we check electrical capacity at the same visit.

Do you serve West Seattle, Ballard, and the rest of Seattle?

We serve homes and businesses across Seattle, including Ballard, Capitol Hill, Green Lake, and West Seattle. Call 253-242-5306 or use request service online, and we will confirm your address.

What rebates exist for heat pumps and heat pump water heaters in Seattle?

Seattle City Light, the city’s electric utility, lists rebates for qualifying equipment such as heat pump water heaters, and other programs may apply to your project. Eligibility and amounts change, so verify current terms with the utility before you buy. Our rebates page is a good starting point.

Schedule HVAC, Plumbing & Electrical Service in Seattle, WA

From a heat pump that quit on a cold morning in Ballard to a water heater swap in West Seattle, Resicon covers the heating, the plumbing, and the wiring with one licensed team. To book, call 253-242-5306 or use request service online.